Hi all,
I am struggling with a GSM configuration on a site.
When validating a SMS Device it seems that the message is going out, xMatters also believes so... but I do not receive the message on my cell phone.
- I set the country for the user
- I set the phone class for the country
- I configured the GSM device engine (COM3, AT, 115200, 8, 1, NONE, HARDWARE, <PIN>, PDU, 13)
- I configured the Protocol Provider and User Service Provider
- Then I configured the user with a SMS device and validated it...
This is what is in the logging:
2011-11-22 13:50:49,196 [gsmEngineManager-process-pool-thread-2] INFO - - GSM: Split long message enabled through method: NONE
2011-11-22 13:50:49,196 [gsmEngineManager-process-pool-thread-2] INFO - - GSM: Split long message part 1 of 1 is [<200051>
To validate your phone enter the Validation Code 1487 into the AlarmPoint Web UI reply "RES" followed by a choice Validate], length: 131
2011-11-22 13:50:49,211 [gsmEngineManager-process-pool-thread-2] DEBUG - - GSM: Sending message.
2011-11-22 13:50:49,686 [pool-GSM-thread-2] INFO - - Resource is temporarily unavailable.
2011-11-22 13:50:53,151 [gsmEngineManager-process-pool-thread-2] DEBUG - - Send notification event. Notification ID: 200051 Status: PROVIDER_DELIVERED
2011-11-22 13:50:53,157 [gsmEngineManager-process-pool-thread-2] DEBUG - - Finished processing a job.
So I noticed this line: INFO - - Resource is temporarily unavailable.
Cannot find the problem though...
Any hints or tips?
Thanks in advance!
Jeroen